How do I identify a Ford 312 engine?

How do I identify a Ford 312 engine?

The best way to identify a 312 externally is by checking the flywheel flange on the crankshaft. The 312 ECZ crankshaft has an aspirin-sized dot on the outer edge. If the engine is disassembled, check the casting number on the main cap. ECZ is cast into 312 main caps; all others are EBU.

What is a 312 y-block?

The 312 was the last of Ford’s Y-block engines. Other Y-Blocks such as the Ford 272 V8 and the Ford 292 V8 were so named due to the y-shaped cylinders. The 312 was used in cars with 2 and 4-Barrel carburetors and was sometimes known as the “Thunderbird Special V8”.

Did Ford make a 312 engine?

312. The 312 cu in (5.1 L) V8 engine came out for the 1956 model year and was again used in high-end Ford and Mercury cars, including the Thunderbird.

Is a 292 Y-block a good motor?

A good 292 block is your best bet. A 312 crankshaft must be modified to fit in a 272 or 292 block. Never use 292 pistons with a 312 crank and rods. See all 31 photos John Mummert, who is the most respected Y-block expert on the planet, tells us nearly any 272, 292, or 312 engine can be used for performance purposes.

How can you tell a 292 from a 312?

The only way to positively tell a 292 from a 312 is the same way to tell a real blond. The 312 has ECZ mains caps, all the others are EBU.

Did Ford make a 292 engine?

The 292 engine became optional on all Fords in 1956, and the company also introduced the special 312 cubic inch engine for the high line vehicles such as Thunderbird and all Mercury models. The 312 engine variously made 210, 215, 225, 235, or 245 horsepower depending on the model year.

What was the horsepower of Ford 312 engine?

The 312 engine variously made 210, 215, 225, 235, or 245 horsepower depending on the model year. Starting in 1956, Mercury dealers also offered a performance kit with alternate heads and camshaft, and a twin-four-barrel induction system that bumped 312 output up to 260 horsepower.

When did the 312 Ford engine come out?

The 312 was rolled out in 1956 and it was used in higher end models of the Ford and Mercury line. Most people know it best from being installed in the Thunderbirds of the era.

When did Ford introduce the 312 engine?

How much does a Ford 312 engine weigh?

How do I know what Ford engine I have?

Locate the ID tag under coil attaching bolts for six-cylinder and some eight-cylinder engines. The tag is a series of numbers and letters etched in and used to decipher the year, make, and model of you engine. It is found underneath the bolts on the left or right side of the engine, near the front of the car.

How much horsepower does a 292 Ford engine have?

The 292 engine gave Thunderbird and Mercury drivers 193 horsepower and 280 pound-feet.

What is the Ford part number for a 312 CI piston ring?

NOS Ford Piston Ring Set for 312 ci V8 with Standard 3.80″ bores. Ford part number B6A-6149-AA. .. NOS Ford Piston Ring Set for 312 ci V8 with Standard 3.80″ bores. As used in trucks with double oil.. NOS Ford Piston Ring Set for 312 ci V8 with 3.820″ bores. .0225″ oversize, so file to fit end gap. ..

What is the Ford Y block forging number for a 1964 engine?

For Ford Y-block 1954-1964 engines, 239 or 256, 272 and 292 ci. Connecting rod core forging number E.. Best p/n 5249A Rear Seal, fits Y-block Ford…

What is the Ford part number for a 7017 transmission?

New NORS Transmission Main Drive Gear, Ford part number 1A 7017, also works for B6A 7017 C and B7A .. Set of four new NORS Raybestos wheel cylinders, Ford Part Number AD-2061 and AD-2062 front, 8A-2261 ..

When did the Ford 272 Y block come out?

Ford 272 used block, casting ECG-6015-C; date code 67V3 – made for 1955, 1956, 1957 Ford passenger .. Ford 272 used block, casting ECG-6015-C; made for 1955, 1956, 1957 Ford passenger and truck; with p.. For Ford Y-block 1954-1964 engines, 239 or 256, 272 and 292 ci.