How do I set up my Motorola ap-5131 access point?

How do I set up my Motorola ap-5131 access point?

Move the Ethernet cable from the “WAN” port on the AP-5131 to “Data In” on the Power Injector. The Ethernet cables should be connected as listed below. • Power Injector “Data In” to the computer. Page 8 Motorola AP-5131 Access Point Quick Setup Guide Figure 9. AP-5131 Quick Setup Screen 7. On the New Security Policy screen enter the new Name.

How do I set the security policy for the ap-5131?

Set the Security Policy to “scales” using the drop down menu on the Quick Setup window. Page 11 Access Points are operating, each AP-5131 would be set to a non- overlapping channel (1, 6 and 11). o If non-Motorola (Symbol) Access Points are also in use the channel can be manually set to avoid interference.

What is the symbol ap-5131 access point?

The Symbol AP-5131 Access Point (AP) provides a bridge between Ethernet wired LANs or WANs and wireless networks. It provides connectivity between Ethernet wired networks and radio-equipped mobile units (MUs).

Does the ap-5131 work as a RADIUS server?

The AP-5131 now has the ability to work as a Radius Server to provide user database information and user authentication. Several new screens have been added to the AP-5131’s menu tree to configure Radius server authentication and configure the lo cal user database and access policies.

What are the dimensions of the ap-5131?

• Verify that the unit is grounded before connecting it to the power source. AP-5131 Specifications AP-5131 Specifications 2.1 Physical Characteristics The AP-5131 has the following physical characteristics: Dimensions 5.32 inches long x 9.45 inches wide x 1.77 inches thick. 135 mm long x 240 mm wide x 45 mm thick.

How do I connect to the ap-5131 via the LAN port?

To access the AP-5131 via the LAN port, the LAN port default setting is DHCP client. For this example, the AP-5131’s WAN interface will be used to connect to the access point. The default WAN IP address is 10.1.1.1.