What is the FSI in Pune for redevelopment?
FSI for Pune
| Width of the road (in meter) | Minimum size of plot (sq. m.) | Maximum FSI Permissible |
|---|---|---|
| 9 – 12 m | Below 1,000 | 2 |
| 12 – 18 m | Above 1,000 | 2.5 |
| 18 – 24 m | Above 2,000 | 3 |
| 24 – 30 m | Above 3,000 | 3.5 |
How many FSI are there in Pune?
As per dc rule 2017, FSI for any plot in Pune corporation is of three types as- Basic FSI – means Free FSI on any Plot. In Pune it is 1.10 for residential Building. (Basic FSI is excluding paid FSI or TDR).
What is current FSI Pune?
A ratio of land area to allowable construction area is called floor area ratio or Floor space index (FSI) Example – FSI in Pune in 2019 is 1.10.
What are development control regulations?
Set of rules that are designed to ensure the proper and efficient development of a city, as well as the general welfare of the public, are commonly known as Development Control Regulations (DCR).
What is the cost of TDR in Pune?
Charges for generation of TDR varies from 250 – 350 RS per sq. ft. Professionals registered with Foot2Feet will always give you assured best rate.
Is parking counted in FSI?
ft. each. FSI, however, prohibits public amenities such as common area, parking area, interior open space, pipes and basement completely used for parking. These areas are excluded while calculating FSI.
How is FSI calculated?
It is calculated by dividing the total covered built-up area on all floors of a building by the area of the plot it stands on. For instance, if you have 1,000 square feet of land on which you want to build a residential or commercial building and the FSI in your locality is 1.5, then you could build up to 1,500 sq.
How is fungible FSI calculated?
Typically, the built-up area is the space covered by all the floors in a building and is primarily dependent on the Floor Space Index (FSI)….What is Fungible FSI?
| Road width | Permissible Fungible FSI in Residential Properties |
|---|---|
| 30-40 ft | 20 percent |
| 40-60 ft | 30 percent |
| More than 60 ft | 35 percent |
How is TDR calculated in Pune?
There are certain rules for loading of TDR on any plot or land. This is given in proportion of plot area. Eg – on 9 meter wide road in Pune developer can purchase 40% of TDR means he can purchase & utilize TDR equal to 40% X plot area. Foot2feet have developed FSI & TDR calculator to find TDR capacity of any land.
How can I get TDR certificate?
As per present State/ ULB guidelines in India, TDR can be awarded only when such lands are transferred to the Local body / Urban Development Authority, as the case may be, by way of registered gift deed. The award would be in the form of a TDR certificate issued by the Competent Authority / Sanctioning Authority.
Is Terrace counted in FSI?
Extended terrace will not be counted in the FSI: BMC.
Is balcony free of FSI?
We decided that since balconies are included in the Floor Space Index (FSI), we shall no longer recognise them. It is for the builder to provide a balcony, but if it is provided it cannot be enclosed. To ensure there is no projection into the open space, the BMC has completely disallowed balconies on the ground floor.
